Pegoland Elastic R2T

Composition

Bicomponent reactive adhesive. Component A is made of epoxy-polyurethane synthetic resins, inert loads of fine grain size and organic additives. Component B is made of organic catalysts.

Features and applications

• Excellent workability thanks to its thixotropy. 
• Suitable for interior and exterior areas; for both floors and walls.
• Ideal for the placement of resin agglomerate shower trays.
• This multifunctional adhesive is suitable for different materials in non traditional substrates such as metal, wood, glass fibre, PVC, linoleum.
• This product is known for its high elasticity and ideal water resistance.
• This product produces very low emissions of volatile organic substances.
• Suitable for any kind of ceramic tiles, fine ceramic with or without reinforcement, glass fibre mosaics, any natural stone such as green marbles and slate, polycarbonate panels, resin conglomerates, super fine and flexible stone slabs.
• Suitable for gluing in polyester and glass fibres substrates on floors and walls, in traditional or elastic and flexible substrates such as wooden panels, metal surface and low density panels.
• Ideal for demanding conditions such as, wet areas, swimming pools, bathrooms, very transited floors and tiled floors which are exposed to extreme thermal conditions.
• Gluing in ceramic tiles and mosaics in wooden kitchen countertop.
• Gluing in mosaics and ceramic tiles in metallic areas for pre manufactured bathrooms.
• Gluing of natural stones even if they are instable in presence of moisture or that get spoiled easily.
• Gluing of ceramic tiles, mosaics, reinforced tiles, natural stones, polycarbonate panels or resin conglomerates placed on existent ceramic.
• Gluing of ceramic tiles, reinforced fine slabs, mosaics, natural stones, or resin conglomerates in radiant floors.
• Gluing of mosaics in structures and stencil made out of extruded polystyrene panels used in Arabic bathrooms, hammam, and spas.
• Gluing of ceramic tiles, pool mosaics even on water proof surfaces treated with Morcem Dry products.
• Product free from limitations for road, naval, air or rail transportation. 
• Gluing of ceramic tiles or vitreous mosaic in polyester pools and in fibre glass baths.
• Gluing of ceramic, porcelain stoneware and big size fine slabs with or without reinforcement in exterior façades.
• Resin conglomerates tiles gluing.
• Suitable for waterproofing and placement of ceramic tiles or mosaic in interior wet environments.
• Product that limits the migration of salts through the mortar in the joints, reducing the possibility of efflorescence.

Substrates

• Conventional substrates based on concrete
• Substrates should be resistant , stable, healthy and clean; without any dust, or any other organic products.
• Sulphate base layers (anhydrite).
• Gama Niveland products levelling.
• Concrete in situ or prefabricated.
• Waterproofed with Morcem Dry products substrates.
• Surfaces coated with resinous decorative systems (pre-sanded).
• Concrete veneer, lime/ concrete veneer, plaster/ anhydrite based veneers.
• Wooden or metal panels, fibre glass, PVC; linoleum, parquet, existing ceramic tiles or natural stones; low density panels.
• All substrates should have the adequate flatness.

Instructions for use

• Pour the full package of component B (catalyst) on the component A (plaster). Mix it with the help of a helix drill at a low velocity until a homogeneous paste without lumps is obtained. Do not mix it with your hands. Both packaging are pre-dosed; and therefore, no errors should be contemplated in the mixture.
• Apply the product with the adequate notched trowel.
• Place the tiles on top of the fresh adhesive and press to make sure they touch the adhesive area before it exceeds its opening time, 50 minutes.
• When using the product in exterior areas, swimming pools, big areas, very transited floors, thin slab, detachable substrates, and any situation where important temperature fluctuations may occur, It's important to apply the adhesive in the substrate and the back part of the tiles in order to get a perfect layer covered with the adhesive and without holes.
• In case of waterproofing and placement, apply with a flat trowel a layer of at least 1 mm of product in the area to be waterproofed and once dry (after approximately 24 hours) apply the product with the corresponding notched trowel for the placement of the ceramic material.
• The working time of the product, in normal temperature and humidity conditions, is about 1 hour- High temperatures reduce it and lower temperatures increase it.
• Preserve the original joints (expansion, contraction, division, perimeter joints, etc.) and the position within tiles (2 mm minimum in interior areas and 5 mm in exterior areas).
• Ceramic areas should be protected, for at least 24 hours, from any possible rain. Tiles areas will be ready after 7 days.
• The joints will be done after 24 hours. Use the adequate mortar from the MORCEMCOLOR line, according to the type of joint

NOTE: The lesser time between the combing and the placement of the tiles, the better the results