Tradimur® GP

Composition

Product based on high resistance cement, selected aggregates, additives and synthetic resins which ensure water proofing, transpiration, open time and bonding capacity.

Features and applications

• Bonding of insulation glass fibre or rock wool panels.
• Excellent adherence to hold the insulation weight.
• Rainwater proof and permeable to water vapour.
• Easy to apply.

Substrates

• Conventional cement and brickwork based substrates.
• Substrates must be resistant, stable, sound and clean, free of dust, demolding agents, organic products, etc.
• In case of hot or windy weather conditions or when applying over absorbent substrates, it is advisable to wet the substrate and wait till the thin layer of water disappears.

Instructions for use

• TRADIMUR is specially designed to be applied with mortar pumping machines. Set the optimum proportion of water/TRADIMUR according to the chosen machine (section and hose length) and external weather conditions. Start with 1 to 4 ratio and modify gradually until you achieve the appropriate consistency.
• For manual application add water and mix by hand or mechanically until it has an even and workable consistency. Spread on the substrate.
• The recommended application thickness varies from 3 to 5 mm.
• When the mortar is still fresh, lay the insulation by applying normal pressure, making sure no gaps are left between panels.
• Proceed with the interior brickwork.

Cautions and recommendations

• Do not apply below 5ºC nor above 30ºC.
• Do not apply when there is a risk of frost, rain, strong wind or direct sunlight.
• Do not apply on gypsum or derivatives.

Packaging

25 kg plastic-lined paper bags.
Shelf life: 1 year in sealed original packaging, sheltered from weather conditions and humidity.

Note

Instructions of use are given based on our testing and knowledge and do not imply any commitment. Said instructions do not free the user from examining and verifying the product for its correct use.
The manufacturer's liability is limited to the value of the used goods. Complaints must be accompanied with the originall package to allow proper traceability.

Technical data