Pumacril Revestimiento Fachadas

Composition

Product formed by a dispersal of acrylic resin.

Features and applications

• Great whiteness an opacity.
• Impervious to rain water and pervious to steam.
• High stability under ultraviolet rays and in the open.
• Excellent adherence on usual construction supports such as cement mortar, plaster, brick, etc.

Substrates

NEW SURFACES

• Eliminates dust, grease and other contaminants.
• Apply a layer of FIJAMOR diluted with 2 or 3 parts of water to equalise support absorption.
• Apply the paint according to instructions for use.

ANCIENT SURFACES

• Eliminate mold pollution with bleach or other appropriate decontaminant, as well as loose paint pieces or other construction material.
• Level irregularities with appropriate putty.  Leave to dry and sandpaper.
• Apply a layer of FIJAMOR diluted with 2 or 3 parts of water to equalise support absorption.
• The use of hydrofuge sealer is recommended on surfaces in poor conditions, poorly united or with dampness problems.
• Apply the peinture according to instructions for use.

Instructions for use

• Shake until mixture is homogeneous.
• Dilute the first layer between 10-15% of water.
• The second hand and following hands can be diluted up to 5-10% of water depending on work conditions requirements.
• Apply a brush, roller or gun.
• Dry to touch time 30 minutes.
• Cleaning of tools done with water immediately after use.

Cautions and recommendations

• Do not apply at temperatures below 5ºC.
• Do not apply either with relative humidity greater than 85% or on wet supports.
• Stores in fresh and dry places.