Antisalmor

Composition

Mixture of solvents and organic products.

Features and applications

• Great surface penetration.
• Salt-dissolution capacity.
• Hinders the crystallization of salts on treated surfaces.
• Transparent and colorless.
• Capable of joining particles that are loose or lightly bonded.

Substrates

NEW:

• Remove dust, grease and other contaminants.
• Apply ANTISALMOR according to instructions for use.

OLD:

• Remove mold contamination with bleach or other suitable decontaminant, and also any loose bits of paint or other construction materials.
• Level irregularities with a suitable filler.
• Leave to dry and sand down.
• Apply ANTISALMOR according to instructions for use.

Instructions for use

• Shake to homogenize the product.
• Brush the surface to be treated forcefully.
• Act vigorously on the surfaces with high salt deposits; use a bristled brush for this and try to open up the pores as much as possible.
• Apply with a brush or roller, priming with the greatest quantity possible.
• Tack-free time: 30 minutes.
• The surface should be rinsed well once the primer ANTISALMOR is dry.
• The treated surface can be repainted; wait at least 4 hours after the ANTISALMOR has been applied.
• Before the repainting, or on facings with minor problems, ANTISALMOR can be used as primer, applying it diluted with 2 parts of water.
• Tools should be cleaned with water immediately after their use.

Cautions and recommendations

Do not apply at temperatures below 5⁰C or above 30⁰C, in direct sunlight, rain or when there is a risk of frost.