Pegoland® Fix D1

Composition

Ready to use adhesive made with resins, and specific additives and agents, suitable for fixing any kind of ceramic cladding on vertical interior or exterior substrates.

Features and applications

• Ready to use. No addition of water is necessary.
• Very flexible.
• Recommended for deformable substrates.
• Recommended to fix tiles on carton-gypsum boards.
• Application of polystyrene boards on mortar.
• Fixing by points of insulating panels.
• Tiling on well preserved surfaces made of gypsum.
• Tiling on well preserved painted surfaces.
• Temporary fixing of tiles on wood.
• Fixing tile over tile.

Substrates

Substrates must be clean and free of dust, oil, paint, loose particles, etc
It is very important that the substrates are completely dry before the application
The substrate must be completely hardened.

Instructions for use

A) Mix Pegoland Fix to obtain a homogenous paste.
B) Spread in small areas using a max 4mm saw to level.
C) Press on the sides to level.
D) Wait 24 hours before grouting.Use the appropriate mortar from the MORCEMCOLOR range depending on the type of joint.

Cautions and recommendations

• Do not apply with a saw notched trowel larger than 4mm.
• Do not apply under direct sunlight or on hot substrates.
• Do not set non absorbant tiles on non absorbant substrates.
• Maximum tile weight is 30Kg/m² and maximum size is 1600cm2 when applying with Pegoland Fix Plus.
• Apply adhesive on the substrate and on the tile when tiles are equal or larger      than 900cm².