Morcem® Texture Resina View larger

Morcem® Texture Resina

New

Product for protecting coatings based on a pure acrylic resin dispersion which can be used for finishing stamped mortars, protecting them from external agents by sealing the pores.This product, when applied on stamped mortars, improves their characteristics, giving them a uniform appearance.It increases cohesion due to its fine particle size.

Price per 25l./pc

More details

Quantity 1000

125,00 €

Add to wishlist

More info

Features and applications

  • Protection of coatings.
  • Good adhesion and sealing capacity.
  • It increases the resistance to impact and abrasion providing a finish with great hardness and good flexibility.
  • It has a very good waterproofing capacity preventing the emergence of efflorescence.

Instructions for use

  • Apply immediately after the surface to be treated has hardened. Spread the product directly by using a spray, endeavoring to leave a uniform film, without an excessive accumulation of the product, and avoiding leaving layers which are too thick.
  • It should usually be used pure, although the yield can be increased by diluting the product up to a maximum of 30% with Xylene, naphtha or aromatic hydrocarbons, depending on the condition of the substrate, the specific purpose of the application and the effectiveness of the finish which is wanted.

Cautions and recommendations

  • Do not apply at temperatures below 5°C or above 35°C.
  • Do not apply if there is a risk of frost, rain, strong wind, direct sunlight or if the relative humidity is greater than 85%.
  • The product is harmful and flammable under normal application conditions. It is necessary to use the special measures contained in the safety datasheet and to comply, at all times, with the stipulations of the Law on Prevention of Occupational Risks.

 

Packaging

25 liter containers.Store in its sealed original packaging, sheltered from weather conditions and humidity, and avoid exposing it to temperatures below 5°C or above 35°C.