Paviland® Resina D20 View larger

Paviland® Resina D20

New

Liquid product best for paving protection, formulated on the basis of acrylic resins with excellent hardness and ultraviolet ray resistance, dissolved in aromatic solvents
Hardens through solvent evaporation and is especially advisable for concrete varnish, cut stone, etc, both in the interior and in the exterior, leaving a protective and decorative film with excellent properties

Price per 25L/pc

More details

Quantity 971

116,60 €

116,60 € per unid.

Add to wishlist

More info

Features and applications

  • Protection and curing of stony exterior paving.
  • Floor paving.
  • Shows good adherence and sealing capacity.
  • Increases resistance to impact and abrasion resulting in finishing with great hardness and good flexibility.
  • Has a high waterproofing power, preventing the appearance of efflorescence.
  • Improves resistance to acids and diluted bases, oils, detergents, etc, conferring greater durability to the support.
  • Provides a passable finishing, with good retention of brightness and heightening the natural appearance of paving.

Instructions for use

  • Apply immediately after hardening of surface to be treated, spreading the product directly by means of an atomiser and making sure to leave a uniform film, without excessive product accumulation and avoiding overly thick layers.
  • The thickness of the layer, once it is dry, must be around 30-40 microns and it may be re-painted after at least 6 hours at 20 C, depending on the sheen grade that is required.
  • The tools used must be cleaned with xylene or universal solvent.

Cautions and recommendations

  • Do not apply below 5ºC nor above 35ºC.
  • Substrates must be clean, dry, free of grease, fissurews or materials disintegrates
  • Do not apply when there is a risk of frost, rain, strong wind or direct sunlight.
  • Adequate ventilation must be available in closed areas during the time of application and drying of the product.
  • Work Risk Prevention Laws shall be observed at all times.
  • Toxic when inhaled, ingested or when in contact with skin and/or eyes.
  • Do not eat, drink or smoke during application.
  • Maintain away from sources of heat. Sheltered and well sealed.
  • Apply with spray gun only in areas with good ventilation. Use respiratory safety equipment when necessary