Morfex 25kg.

Composition

Product based on alumninous cement and special aggregates which allow it to withstand high temperatures.

Features and applications

• Construction of chimneys, barbecues, furnaces, etc.
• Plastering at high temperature conditions. (1,200 ºC)

Substrates

• Substrates must be resistant, stable, sound and clean, free of dust, demolding agents, organic products, etc.
• In case of hot or windy weather conditions or when applying over absorbent substrates, it is advisable to wet the substrate and wait till the thin layer of water disappears.
• Do not apply on clay or on paint.

Instructions for use

• Add water and mix by hand or mechanically until it takes on an even and workable consistency.
• Carry on with the brickwork wall as usual.

Cautions and recommendations

• Do not apply below 5ºC nor above 30ºC.
• Do not apply when there is a risk of frost, rain, strong wind or direct sunlight.
• In extreme weather conditions (strong winds or high temperatures) it is necessary to water the product with light sprinklers the day after applying it.
• Put into service after 7 days, heating gradually.